Distribution panels and automatic or manual transfer switches from the NexSource yard on Queensgate Crescent — rented on their own or with a generator, and specified with the people who will set them up.
Most calls for distribution in and around Red Deer come from one of four situations. In each, the panel or the switch decides whether the plan works on the day.
A shop, clinic or office in Red Deer having its main service replaced. The utility takes the building off for the day; a set plus a panel or transfer switch keeps the essentials on while the electrician works.
Commercial generator rentals →New subdivisions and business parks around Red Deer, Blackfalds and Penhold need trailers, tools and heat long before the permanent service is energised. One panel splits the supply; its layout changes as the site does.
Construction generators →Processing and petrochemical sites in Central Alberta take their permanent supply down for planned work. Temporary distribution carries lighting, heat trace and contractor trailers, switched over on a schedule that was agreed weeks ahead.
Emergency power distribution →A fair, rodeo or concert has vendor rows, a stage and lighting spread across open ground. The generator is the easy part; getting safe circuits to every corner of the site is the job distribution does.
Generator rentals in Red Deer →Read from the rental inventory each time the page loads, with ratings and enclosure details on every unit page. Cable is sized to the run and quoted with the job rather than listed. If the source and the loads are at different voltages, see transformer rentals.
Need the source too? Generator rentals in Red Deer lists the gas and diesel sets on the same yard. For distribution anywhere else in the province, see power distribution rentals in Alberta.
Distribution problems are layout problems: a panel in the wrong spot, a run that ends up longer than anyone guessed, a switch whose connections don't suit the building's gear. They are much easier to solve standing next to the equipment than over the phone.
For a Red Deer job you can do exactly that. Ask for a time with your quote, come to 77 Queensgate Crescent, and look the panel or transfer switch over with the crew who will set it up. Bring the single-line drawing if there is one, or photos of the existing service.
After it is on site, field service is in the same city, around the clock, on (403) 887-4567.
When a rental is carrying a building through a planned shutdown, the utility sets the date. Inside city limits that is the City of Red Deer's Electric Light & Power; outside them most sites are served by FortisAlberta. Your electrician arranges the outage and the permit, and the generator, panel and switch are booked around it.
| Where the power comes from | A rental set, an existing generator or a utility service — and its voltage and phase. |
| What it has to reach | The loads, roughly in amps or kW, and how they group into circuits. |
| How far | Rough distances from the source to each group of loads. Long runs change the cable. |
| Switching | Whether the site needs to move between utility and generator, and whether anyone will be there when it does. |
| Indoors or out | Gear that sits outside through a Red Deer winter needs an enclosure rated for it. |
| Who terminates it | Your electrical contractor, or arranged with the package. Decide before the truck is booked. |
The amperage calculator turns kW into amps at the common voltages, which is a quick way to check a load list before you send it.
The same yard supplies sites across the region. Anywhere not listed is quoted the same way — send the address or legal land location with the loads.
From the NexSource yard at 77 Queensgate Crescent, in the Queens Industrial area — the same site the rental generators go out from. The office is open Monday to Friday, 8 am to 5 pm, and field service answers 24/7 on (403) 887-4567.
Yes. Being in the same city is the point: ask for a time when you request the quote and you can look over the gear and talk through the layout with the people who will set it up. Call ahead so the right person is in the yard.
No. Panels and transfer switches rent on their own, and sometimes what a Red Deer site is missing is a way to split or switch power it already has. Most go out alongside a set, which is when the voltages on both sides are easiest to pin down.
If someone will be on site when the supply goes off and comes back, a manual switch does the job and costs less; the fleet has a 400 A manual unit in an outdoor-rated enclosure. If the building has to pick itself back up with nobody there, it needs the 1,000 A automatic switch, or whatever the load calls for.
The building owner or their electrician, with the utility that serves the address — in the city that is the City of Red Deer's Electric Light & Power, and outside it most sites are on FortisAlberta. Book the outage first and build the rental around that date.
It is quoted per job with whatever it feeds. The rating, the number of circuits, the cable lengths, the switching and the term all change it, so there is no rate card. Help working out what you need costs nothing, and the quote comes back in writing.
That is enough to specify the panel, the switch and the cable for a Red Deer site and quote them in writing — with the generator, if it needs one.
